|
Product Details:
|
| Certification: | ISO9001 | Product Name: | Core Breaking Anchor Bolt |
|---|---|---|---|
| Material: | Carbon Steel | Cement Strength: | 260-300kgs / Cm2 |
| Packing: | Wooden Box | Warranty Time: | 12 Months |
| Product Name: | Anchor Bolt | Type: | Anchor Bolt |
| Name: | Anchor Bolt | ||
| High Light: | Concrete Core Breaking Anchor Bolt,20mm Core Breaking Anchor Bolt,ISO9001 Core Breaking Anchor Bolt |
||
Core Breaking Anchor Bolt For Concrete And Stone Various Solid Bricks
Product characteristics
Body material: carbon steel stainless steel, inner core nail made of carbon steel heat treatment, equipped with gasket nut combination.
Applicable base materials: concrete, stone various solid bricks.
This product is suitable for construction engineering, electrical engineering, toilet engineering, heater installation engineering, billboard installation engineering, chair fixing, machinery equipment fixing engineering, etc.
This product room is a kind of gecko with the most simple installation. There is no accurate requirement for the drilling depth of the gecko, which can be adjusted up down according to the nut body pipe.
The rated tensile force values are measured under the condition of 260-300kgs / cm2 cement strength, the maximum safe load shall exceed 25% of the rated value
| Product specifications | Product outer diameter | Length of dentition | Borehole diameter | Maximum tensile strength(kgs) |
| M6*45 | 6 | 15 | 6.4 | 475 |
| M6*60 | 6 | 20 | 6.4 | |
| M8*50 | 8 | 20 | 8.5 | 705 |
| M8*70 | 8 | 25 | 8.5 | |
| M10*60 | 10 | 25 | 10.5 | 1160 |
| M10*80 | 10 | 25 | 10.5 | |
| M10*90 | 10 | 30 | 10.5 | |
| M10*100 | 10 | 30 | 10.5 | |
| M10*120 | 10 | 30 | 10.5 | |
| M10*150 | 10 | 30 | 10.5 | |
| M12*70 | 12 | 25 | 12.7 | 1826 |
| M12*90 | 12 | 30 | 12.7 | |
| M12*100 | 12 | 40 | 12.7 | |
| M12*120 | 12 | 50 | 12.7 | |
| M12*150 | 12 | 50 | 12.7 | |
| M14*120 | 14 | 40 | 15.0 | 2650 |
| M14*150 | 14 | 40 | 15.0 | |
| M16*100 | 16 | 40 | 17.0 | 3216 |
| M16*120 | 16 | 40 | 17.0 | |
| M16*150 | 16 | 50 | 17.0 | |
| M18*140 | 18 | 50 | 19.2 | 3945 |
| M18*160 | 18 | 50 | 19.2 | |
| M18*180 | 18 | 60 | 19.2 | |
| M20*130 | 20 | 50 | 21.5 | 4450 |
| M20*150 | 20 | 50 | 21.5 | |
| M20*190 | 20 | 50 | 21.5 |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
