|
Product Details:
|
| Name: | Elevator Limit Switch | Type: | Elevator Parts |
|---|---|---|---|
| Vibration: | 10-55Hz | Operation Speed: | 5mm-0.5m/s |
| Humidity: | <95% RH | Packing: | Standard Packing |
| Rated Voltage: | 125VAC 250VAC | Product: | Elevator Limit Switch |
| Model: | Elevator Limit Switch | Protection Level: | IP66 |
| High Light: | Stainless Steel Rotary Limit Switch,Elevator Rotary Limit Switch,Elevator Electrical Parts Switch |
||
Stainless Steel Rotary Limit Switch For Elevator With Various Actuators
Ratings
| Rated Voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
| Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
|
125VAC
250VAC
|
5 5 |
5 5 |
1.5 1 |
0.7
0.5
|
3 3 |
3 3 |
2 1.5 |
1 0.8 |
| 14VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| 30VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| 125VDC | 0.4 | 0.4 | ||||||
| 250VDC | 0.2 | 0.2 | ||||||
| Inrush Current | N.C: below 24A, N.O: below 12A | |||||||
Specififications
| Electical: 30 operations/min | |
| Contact resistance | 25mΩ max. (initial value) |
| Insulation resistance | 100mΩ min. (below 500VDC) |
|
Dielectric strength |
1500VAC, 50/60 Hz for 1 minute between current-carrying and non--current-carrying metal parts |
| 1500VAC, 50/60 Hz for 1 minute between current-carrying and non--current-carrying metal parts | |
| 1500VAC, 50/60 Hz for 1 minute between each terminal and ground | |
| Vibration | 10-55Hz,1.5mm double amplitude |
|
Shock |
Mechanical durable: 1, 000m/Sec2 (about 100G’S)
Malfunction: 300m/Sec2 (about 30G’S)
|
| Ambient temperature | Using:-20~+70℃(With no icing) |
| Humidity | <95% RH |
| Electrical life | 300,000 operations above |
| Protection level | IP66 |
Appearance and Dimension
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
