|
Product Details:
|
| Name: | Elevator Encoder | Type: | Elevator Parts |
|---|---|---|---|
| Resolution: | 2048P/R | OD: | Ф58mm |
| Used: | Car Parts | Model: | Elevator Encoder |
| Warranty Time: | 12 Months | Transportation: | DHL TNT FEDEX |
| Product: | Elevator Encoder | ||
| High Light: | lift components,elevator accessories |
||
Elevator Encoder ERN 1387 2048 ID749144-59 Elevator Encoder OD Ф58
Elevator Encoder
OD Ф58, Hollow outside-taper shaft, Mounting with Bulge Ring.
Unique aging compensation for illuminant to enhance reliability.
Suitable for closed-loop control of permanent magnet synchronous motor and elevator tractor .
Rear outlet cable, small size, light weight, easy to mount.
Specification
| Electrical | Mecharical and Environmental | ||
| Supply Voltage | DC5V±5% | Rotating speed | ≤2000rpm |
| Current Consumption | ≤200mA(No load) | Starting Torque | 5x10³ N·m(25℃) |
| Frequency Response | ≤50kHz | Axial Load | 10N |
| Z Signal Amplitude | ≥200mV | Radial Load | 10N |
| DC Offset Voltage | Vd=2.6v±20mv | Shock | 980m/s²,6ms,3 times per axial(XYZ) |
| Vpp Differential signal Amplitude | Vpp=1v±0.2v | Vibration | 50m/s²,40-200Hz,2 hours per axial(XYZ) |
| Waveform Distortion | ≤2% | Protection rating | IP40 |
| Resolution | 2048P/R | Operating Temperature | -20~+120℃ |
| Insulation Resistance | ＞200MΩ(AC500V 1 min) | Storage Temperature | -40~+120℃ |
| Output Waveform | Analog sine and cosine signal | Humidity | 95%RH(No condensing) |
| / | Mass | 0.3kg(No cable contained) | |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
