|
Product Details:
|
| Name: | Lift Push Button | Shape: | Square |
|---|---|---|---|
| Size: | 40x42x17mm | Voltage: | 12-24 V |
| Tact Switch: | Omron | Pushing Pressure: | 2-3.5 N |
| Lift Mechanism: | Telescoping Lift | Use Of Occasions: | Public Traffic |
| Type: | Lift Push Button | Model: | Lift Push Button |
| High Light: | lift push buttons,elevator panel buttons,Stainless Plate Lift Push Button |
||
Zn Alloy Frame Push Button of Cop/Lop (SN-PB54)
Voltage 12-24 V High Quality Stainless Plate Lift Push Button With Braille For Cop/Lop
| Size: | 40x42x17mm |
| Material: | Zn alloy frame;stainless plate;tact switches;front embedded, the reverse side will be inserted into slot; button luminescence is alternative and available. |
Why do elevators have two buttons?
Two Call Buttons are used outside the Elevator to determine which Direction you'll be going and to avoid the elevator reach maximum capacity by putting request calls on HOLD by preventing to halt on floors where the person wants to travel an opposite direction. ...The Elevator is on the Ground Floor.
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
