|
Product Details:
|
| Step Width: | 600/800/1000 Mm | Rise: | 6000mm |
|---|---|---|---|
| Balustrade: | 1000 Mm | Inclination: | 35° |
| Capacity: | 4050/6750/9000 Persons/hour | Delivery: | 15-30 Days |
| Keywords: | Handrail Escalator | Warranty: | 12 Months |
| Model: | Escalator | Type: | Escalator |
| Product: | Escalator | ||
| Highlight: | airport moving walkway,lift and escalator |
||
High Capacity Elevator Escalator Commercial Escalator With Vertical Rise Up To 10m
1. Control system: It uses the Mitsubishi PLC which has large storage memory, quick signal relay, simple structure, high reliable, anti-interference capabilities and so on; Ensuring the safe and reliable operation of the escalator
2. Driving System: VVVF technology
3. Four kinds of running mode based on passenger flow rate: Normal Speed, Eco-Dual Speed, Intelligent travel, Bi-directional Modes, With this function it helps the equipment to conserve energy thereby saving operational cost
| 1 | Emergency Stop Button | If pressed in a emergency, stops the moving escalator/ conveyor immediately. | Standard |
| 2 | Motor Speed Device | If the speed above normal speed, stops the moving escalator/ conveyor. | |
| 3 | Motor Over Heat Device | Stops the moving escalator/ conveyor, if the motor is over heat | |
| 4 | Driving Chain Safety Device | Stops the moving escalator/ conveyor, if the driving chain breaks or excessively looses. | |
| 5 | Handrail Inlet Safety Device | Stops the moving escalator/ conveyor, if hand or object is pulled into the handrail inlet. | |
| 6 | Step Sagging Device | Stops the moving escalator/ conveyor, if step are operating in abnormal manner. | |
| 7 | Non Reversing Safety Device | Stops the moving escalator/ conveyor, if its direction of travel is reversed. | |
| 8 | Maintenance Switch | Cuts off operating circuits when maintenance inspection or repair is performed. | |
| 9 | Absent or mistaken epsilon phase device | Escalator/ conveyor can't operate, if Absent or mistaken epsilon phase device | |
| 10 | Comb plate safety device | Stops the moving escalator/ conveyor, if objects are caught between comb plate and pallet treads. | |
| 11 | Motor braking safety device | Help the motor brake properly | |
| 12 | Skirt Guard Safety Device | Stops the moving escalator/ conveyor, if objects are caught between pallet skirts. | |
| 13 | Handrail Speed Monitoring Device | Stops the moving escalator/ conveyor, if handrail speed is below normal due to handrail breakage or elongation. | |
| 14 | Alarm bell | Ringing alarm bell, if escalator/ conveyor operate normally | |
| 15 | Auto- lubricate device | Auto- lubricate to escalator/ conveyor | |
| 16 | Pallet Demarcation | Yellow two demarcation lines provide a visual and physical warming of the pallet edges | |
| 17 | Self-diagnose Device | Self-diagnose the whole system, if escalator/ conveyor run normally | Option |
| 18 | Skirting illumination | Lamps are provides at the both sides of skirt panel |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
