|
Product Details:
|
| Name: | Gearless Traction Machine | Load: | 630~1150kg |
|---|---|---|---|
| Speed: | 1.0~2.5m/s | Shaft Load: | 30kN |
| Weight: | 330kg | Roping: | 2:1 |
| Applicable: | Elevator Equipment | Warranty Time: | 12 Months |
| Transportation: | Sea Delivery | Material: | Metal |
| Model: | Gearless Traction Machine | Type: | Gearless Traction Machine |
| High Light: | 30kN Elevator Traction Machine,330kg Lift Traction Machine,Shaft Load Gearless Traction Machine |
||
WITTUR elevator gearless traction machine with 400mm sheave diameter
| 630~1050KG | 800~1150KG | |||||||
| Rated loads up to(kg) | 630 | 800 | 1000/1050 | 800 | 1000 | 800 | 1000 | 1150 |
| Rated torque(N.m) | 420 | 535 | 670 | 540 | 670 | 600 | 740 | 740 |
| Traction sheaveΦ(mm) | 400 | 400 | 400 | 400 | 400 | 450 | 450 | 400 |
| Rated speed(m/s) | 1.0....2.0 | 1.0...2.5 | ||||||
| Shaft load(kN) | 30kN | 35kN | ||||||
| CTE test | Y | |||||||
| Motor Type | Glearless PM synchronous | |||||||
| Net weight(kg) | 330 | 330 | 340 | 330 | 360 | 380 | 390 | 370 |
| MRL solution | Applied | |||||||
| Installation | ONLY vertical installation inmachine room or top of the shaft | |||||||
Features
·Special housing design provides stable and high structural rigidity. Design is verified FEM and physical mechanical test.
·Designed by outer rotor. Possible to generate bigger torque with low noise and vibration. Provides comfortable ride.
·Solid construction for permissible shaft load Fs at the traction sheave up to 35kN
·Safety brake system with electro-magnetical release, provides min. 2×950Nm
·CTE test approved according to GB7588 and TSG T7007
·Groove profiles according to lift system
·Perfect rated motor, use of high - performance permanent magnet, degree of protection IP40, insulation class 155℃ (F), temperature control
·Motor with 2 times overload capacity ; max. travelling height up to 120m
·EC type-examination certificate according to EN 81-20/50, can be used for UCM solution
·Inverter compatible measuring device, rigid coupling or intergrated. (e.g. ECN 1313; ERN 1387; TS5213N2503; EI53C9.25-2048-SA5N2T)
·Variable options regarding voltage, speed, torque, braking torque and traction sheave parameters
·The braker passed 2 million times braking. After the test, its performance is still in specification. Safety is guaranteed.
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei CHEN
Tel: +86-13661864321
Fax: 86-021-59168286
